Analytical Approach of Designing Passive Filter for SMPS Load

  • Muhammad Shahzad Bajwa Bajwa Electrical Engineering Department, Quaid-e-Awam University of Engineering, Science and Technology Nawabshah , Pakistan
  • Muhammad Usman Keerio Electrical Engineering Department, Quaid-e-Awam University of Engineering, Science and Technology Nawabshah , Pakistan
  • Noor Hussain Mugheri Electrical Engineering Department, Quaid-e-Awam University of Engineering, Science and Technology Nawabshah , Pakistan
  • Riaz Hussain Memon Electrical Engineering Department, Quaid-e-Awam University of Engineering, Science and Technology Nawabshah , Pakistan
  • Wajid Ali Shaikh Electrical Engineering Department, Quaid-e-Awam University of Engineering, Science and Technology Nawabshah , Pakistan
Keywords: SMPS load, Power quality, Non-active power, Passive Filter, Simulink Model.

Abstract

The use of switch mode power supply (SMPS) load such as computer, laptop, etc in residential as well as commercial areas give rise to harmonics pollution in the electrical power distribution system which causes the quality of power poor and the function of equipment connected to the electrical system is affected. Many electrical appliances have an SMPS design that characteristically draws a distorted current that flows back to the input supply and causes distortion in the voltage waveform. To ensure the safe functioning of various electrical devices, there is a need for the implementation of effective harmonics mitigating techniques. Passive filters have been used for mitigating voltage and current harmonics. This paper proposed an analytical approach to designing the passive filter instead of trial and error or a complex approach for harmonics mitigation. The Simulation Model of SMPS is developed in MATLAB/Simulink and used for validating the proposed approach. Simulation results show the attractive findings of the proposed approach for harmonic mitigation with the improvement of the power factor.

Published
2022-09-14
How to Cite
[1]
M. S. Bajwa, M. Usman Keerio, N. Hussain Mugheri, R. Hussain Memon, and W. Shaikh, “Analytical Approach of Designing Passive Filter for SMPS Load”, PakJET, vol. 5, no. 2, pp. 163-170, Sep. 2022.

Most read articles by the same author(s)